Toyota Corolla Cross: Cylinder Block
READ NEXT:
PRECAUTION
HINT:
Any digits beyond the 0.01 mm (1/1000 in.) place for standard, minimum and maximum values should be used as a reference only.
When both standard and maximum or minimum valu
DISASSEMBLY CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced durin
INSPECTION PROCEDURE 1. INSPECT CYLINDER BLOCK FOR WARPAGE
(a) Using a precision straightedge and feeler gauge, check the surface which contacts the cylinder head gasket for warpage.
Maximum
SEE MORE:
Check the battery as follows.
■ Battery exterior
Make sure that the battery terminals
are not corroded and that
there are no loose connections,
cracks, or loose clamps.
Terminals
Hold-down clamp
■Before recharging
When recharging, the battery produces
hydrogen gas which is flammable
and exp
DESCRIPTION
This procedure is for troubleshooting when the brake system
warning light (yellow indicator) remains on but no DTCs are output.
The skid control ECU (brake actuator assembly) controls the
brake system warning light (yellow indicator) in the combination meter assembly
via CAN comm
Precaution
Battery
