Toyota Corolla Cross: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE REAR SEAT REMINDER SYSTEM
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
HINT:
The following items can be customized.
(a) Customizing with the multi-information display (combination meter assembly)
(1) Turn the ignition switch to ON.
(2) Enter the following menus: Settings / Vehicle Customize / Utility.
(3) Select the setting by referring to the table below.
NOTICE:
As some values cannot be selected when the vehicle is being driven, perform the procedure with the vehicle stopped.
Utility
|
Display | Description |
Setting | ECU |
|
Rear seat reminder | Rear seat reminder function setting |
ON/OFF | Main body ECU (Multiplex network body ECU) |
READ NEXT:
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of pr
RemovalREMOVAL CAUTION / NOTICE / HINT
Procedure Part Name Code
1 SWITCH BASE
55449D -
- -
2 REMOVE SEAT HEATER SWITCH
84751F
SEE MORE:
PARTS LOCATION ILLUSTRATION
*1 CANISTER
*2 FUEL PUMP (for Low Pressure Side)
*3 MASS AIR FLOW METER SUB-ASSEMBLY
*4 PARK / NEUTRAL POSITION SWITCH ASSEMBLY
*5 NO. 1 ENGINE ROOM RELAY BLOCK ASSEMBLY
*6 NO. 2 RELAY BLOCK ASSEMBLY
*7 FUE
DESCRIPTION This circuit is the power source circuit for the combination meter assembly. This circuit provides two types of power sources; one is a constant power source, and the other is an IG power source. WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
When replacing the combination meter