Toyota Corolla Cross: Changing the meter display
The multi-information display is
operated using the meter control switches.
.png)
: Select menu icons
: Change displayed
content, scroll up/down the
screen and move the cursor
up/down
- Press: Enter/Set
Press and hold: Reset/Display
customizable items
- Return to the previous screen
Call sending/receiving and
history display
Linked with the hands-free system,
sending or receiving call is displayed.
For details regarding the
hands-free system, refer to the
"MULTIMEDIA OWNER'S MANUAL".
READ NEXT:
■ Display items
Speedometer display/Driving
range
Fuel economy
Eco Driving Indicator/Driving
range
■ Speedometer display/Driving
range
Speedometer display
Driving range
Displays driving
■ Driving support system
information
Select to display the operational
status of the following systems:
LTA (Lane Tracing Assist)
LDA (Lane Departure Alert)
PCS (Pre-Collision System)
Dynamic r
■ Drive information
Displays drive information such as
the following:
Drive information type
Drive information items
Displays the following depending
on which drive information type and drive i
SEE MORE:
ON-VEHICLE INSPECTION
PROCEDURE
1. CONNECT GTS
(a) Connect the GTS to the DLC3 with the engine switch off.
(b) Start the engine and run it at idle.
(c) Turn the GTS on.
(d) Enter the following menus: Chassis / Brake/EPB / Active Test.
HINT:
Refer to the GTS operator's manual for further
DESCRIPTION
Detection Item
Symptom
Trouble Area
Front Camera Module Communication Stop Mode
Communication stop for "Front Camera Module" is indicated on the "Communication
Bus Check" screen of the GTS.
Click her