Toyota Corolla Cross: System Description
SYSTEM DESCRIPTION
FRONT SEAT HEATER
(a) By operating the seat heater switch, the temperature can be controlled within the range of 30 to 50°C (86 to 122°F).
(b) The seat heater switch indicator lights indicate the seat heater operating states.
READ NEXT:
OPERATION CHECK CHECK THERMOSTAT IN FRONT SEAT CUSHION HEATER ASSEMBLY LH
(a) Remove the front seat cushion heater assembly LH.
for Manual Seat:
Click here
for Power Seat:
Click here
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of pr
SEE MORE:
ON-VEHICLE INSPECTION PROCEDURE
1. INSPECT DRIVER SEAT BELT WARNING LIGHT HINT: The seat belt warning light on the combination meter assembly is used for both the driver seat and front passenger seat.
(a) Turn the ignition switch off. (b) Turn the ignition switch to ON.
(c) When the driver sea
DESCRIPTION Refer to DTC P001313. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P001700 Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B
Deviation in the crankshaft position sensor signal and camshaft posi
