Toyota Corolla Cross: Steering Pad
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 PRECAUTION
-
- -
2 CABLE FROM NEGATIVE AUXILIARY
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLTION)
Procedure Part Name Code
1 HORN BUTTON ASSEMBLY
45130
- -
2 CABLE
DISPOSAL CAUTION / NOTICE / HINT
CAUTION: Before performing pre-disposal deployment of any SRS part, review and closely follow all applicable environmental and hazardous material regulations. Pre-di
SEE MORE:
DESCRIPTION
The purpose of this circuit is to prevent the engine from stalling when the brakes
are suddenly applied while driving with lock-up on.
When the brake pedal is depressed, the stop light switch assembly sends a signal
to the TCM. Then the TCM cancels the operation of the lock-up clut
DESCRIPTION Refer to DTC P012011. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P022015 Throttle/Pedal Position Sensor/Switch "B" Circuit Short to Battery or Open
The output voltage of VTA2 is higher than 4.75 V for 2 second
Removal
Brake Switch "B" Circuit Short to Battery (P070312)
