Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Scheduled maintenance

Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.

For details about maintenance items and schedules, refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement".

■Resetting the message indicating maintenance is required

After the required maintenance is performed according to the maintenance schedule, please reset the message.

To reset the message, follow the procedure described below:

4.2-inch display

1. Press or of the meter control switch to select .

2. Press or to select "Vehicle Settings" and then press and hold .

3. Press or to select "Scheduled Maintenance" and then press .

4. Press or to select "Yes" and then press .

A message will be displayed on the multi-information display when the reset procedure has been completed.

7-inch display

1. Press or of the meter control switch to select .

2. Press or to select "Vehicle Settings" and then press and hold .

3. Press or to select "Scheduled Maintenance" and then press .

4. Press or to select "Yes" and then press .

A message will be displayed on the multi-information display when the reset procedure has been completed.

Do-it-yourself maintenance

You can perform some maintenance procedures by yourself.

Please be aware that do-it-yourself maintenance may affect warranty coverage.

The use of Toyota repair manuals is recommended.

For details about warranty coverage, refer to the separate "Owner's Warranty Information Booklet" or "Owner's Manual Supplement".

    READ NEXT:

     General maintenance

    Listed below are the general maintenance items that should be performed at the intervals specified in the "Owner's Warranty Information Booklet" or "Owner's Manual Supplement/Scheduled Maintenance Gui

     Emission inspection and maintenance (I/M) programs

    Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system monitors the operation of the emission control system. If the malfunction indicato

     Do-it-yourself maintenance

    SEE MORE:

     Outer Mirror Indicator (Module "B" Side) Circuit Open (C1AB413)

    DESCRIPTION This DTC is stored when the blind spot monitor sensor LH (B) detects an open in the outer rear view mirror indicator LH. DTC No. Detection Item DTC Detection Condition Trouble Area C1AB413 Outer Mirror Indicator

     Terminals Of Ecu

    TERMINALS OF ECU CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND POWER DISTRIBUTION BOX ASSEMBLY (a) Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly. (b) Reconnect the power distribution box assembly connector. (c) Measure the voltage and resi

    © 2020-2025 Copyright www.tcorollacross.com PT NL