Toyota Corolla Cross: Rear Seat Side Airbag Assembly
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 PRECAUTION
-
- -
2 CABLE FROM NEGATIVE AUXILIARY
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 REAR SEAT SIDE AIRBAG ASSEMBLY
-
- -
2
DISPOSAL CAUTION / NOTICE / HINT
CAUTION: Before performing pre-disposal deployment of any SRS part, review and closely follow all applicable environmental and hazardous material regulations. Pre-di
SEE MORE:
DESCRIPTION The stop light switch assembly is a duplex system that transmits two signals: STP and ST1-. These two signals are used by the hybrid vehicle control ECU to monitor whether or not the brake system is working properly. If the signals, which indicate the brake pedal is being depressed and r
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization,
or registration) that must be performed after parts are replaced during millimeter
wave radar sensor assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Instal
Removal
Brake Switch "A"/"B" Signal Cross Coupled (P05042B)
