Toyota Corolla Cross: Fuel pump shut off system
To minimize the risk of fuel
leakage when the engine
stalls or when an airbag
inflates upon collision, the
fuel pump shut off system
stops the supply of fuel to
the engine.
Restarting the engine
Follow the procedure below to
restart the engine after the system
is activated.
1. Turn the engine switch to
ACC or OFF.
2. Restart the engine.
NOTICE
■Before starting the engine
Inspect the ground under the
vehicle.
If you find that fuel has leaked
onto the ground, the fuel system
has been damaged and is in need
of repair. Do not restart the
engine.
READ NEXT:
Calmly perform the following actions if any of the warning
lights comes on or flashes. If a light comes on or flashes, but
then goes off, this does not necessarily indicate a malfunction
in the system
The multi-information display
shows warnings for
system malfunctions and
incorrectly performed operations,
and messages that
indicate a need for maintenance.
When a message is
displayed, perform the
Your vehicle is equipped
with a spare tire. The flat tire
can be replaced with the
spare tire.
WARNING
■If you have a flat tire
Do not continue driving with a flat
tire. Driving even a short distanc
SEE MORE:
DESCRIPTION
The airbag ECU assembly has a built-in yaw rate and acceleration
sensor and detects the vehicle condition.
The skid control ECU (brake actuator assembly) receives signals
from the yaw rate and acceleration sensor (airbag ECU assembly) via CAN communication.
The DTC is also stored
FAIL-SAFE CHART
CXPI COMMUNICATION FAIL-SAFE
(a) When there is a CXPI communication malfunction (communication stop), each
load operates as follows.
Power distribution box assembly
Load
Communication Stop with Ignition Switch ON
Communication Stop with Ignition
