Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Brake System Control Module "A" Calibration / Parameter Memory Failure (C059746,C060B49,C061049,C13B000,C13CF1C,C13D41C)

Toyota Corolla Cross (2022-2025) Service Manual / Brake / Parking Brake / Electric Parking Brake System (for Gasoline Model) / Brake System Control Module "A" Calibration / Parameter Memory Failure (C059746,C060B49,C061049,C13B000,C13CF1C,C13D41C)

DESCRIPTION

The following DTCs are stored when a malfunction occurs in the skid control ECU (brake actuator assembly).

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Memory

Note

C059746

Brake System Control Module "A" Calibration / Parameter Memory Failure

Skid control ECU (brake actuator assembly) internal malfunction

Skid control ECU (brake actuator assembly)

DTC stored

An electric parking brake system malfunction is displayed on the multi-information display.

C060B49

Left Electric Parking Brake Actuator Control Internal Electronic Failure

Skid control ECU (brake actuator assembly) internal malfunction

Skid control ECU (brake actuator assembly)

DTC stored

An electric parking brake system malfunction is displayed on the multi-information display.

C061049

Right Electric Parking Brake Actuator Control Internal Electronic Failure

Skid control ECU (brake actuator assembly) internal malfunction

Skid control ECU (brake actuator assembly)

DTC stored

An electric parking brake system malfunction is displayed on the multi-information display.

C13B000

Electric Parking Brake Control Module Performance

Skid control ECU (brake actuator assembly) internal malfunction

Skid control ECU (brake actuator assembly)

DTC stored

An electric parking brake system malfunction is displayed on the multi-information display.

C13CF1C

Left Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range

Skid control ECU (brake actuator assembly) internal malfunction

Skid control ECU (brake actuator assembly)

DTC stored

An electric parking brake system malfunction is displayed on the multi-information display.

C13D41C

Right Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range

Skid control ECU (brake actuator assembly) internal malfunction

Skid control ECU (brake actuator assembly)

DTC stored

An electric parking brake system malfunction is displayed on the multi-information display.

CAUTION / NOTICE / HINT

NOTICE:

  • The electric parking brake may still operate up to 20 seconds after the ignition switch is turned off. Before disconnecting connectors or fuses, turn the ignition switch off and wait 20 seconds or more.
  • After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.

    Click here

  • When replacing the skid control ECU (brake actuator assembly), operate the electric parking brake switch (electric parking brake switch assembly) as the parking brake indicator light (red) blinks when the ignition switch is first turned ON.

PROCEDURE

1.

REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)

Click here

NEXT

END

    READ NEXT:

     Electric Parking Brake Switch Signal Compare Failure (C060962)

    DESCRIPTION When the electric parking brake switch is pulled, a lock request signal is sent from the skid control ECU (brake actuator assembly) to the parking brake actuator assembly. When the el

     Left Electric Parking Brake Actuator Control (C060B00,C060B11)

    DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note C060B00 Left Electric

     Left Electric Parking Brake Actuator Control Circuit Short to Battery (C060B12)

    DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note C060B12 Left Electric

    SEE MORE:

     Rear Height Sensor Circuit Voltage Out of Range (B241A1C)

    DESCRIPTION The headlight ECU sub-assembly LH determines the vehicle height and performs automatic headlight beam level control based on signals from the rear height control sensor sub-assembly LH via direct line. DTC No. Detection Item DTC Detection Condition Trouble Area B241A1

     Check Mode Procedure

    CHECK MODE PROCEDURE HINT: Compared to normal mode, check mode is more sensitive to malfunctions. Therefore, check mode can detect malfunctions that cannot be detected in normal mode. NOTICE: All of the stored DTCs and Freeze Frame Data are cleared if: 1) the ECM is changed from normal mode to che

    © 2020-2025 Copyright www.tcorollacross.com PT NL